Sunday, July 31, 2016

TERRAIN - Dark Deeds Demo Table - Part 2


So, in the last post we went through the construction stage of the table, all fun stuff, and not without its trials and tribulations. Of course, good construction can only get you so far towards "Epic", so I knew that most of my time needed to be focused on the painting and detailing.


I sprayed the entire table with black primer. After I'd done that I realized that I might of got some spray in though the windows and obscured the LEDs. Quick check revealed that I hadn't. Phew! To make sure I didn't get any of the next spray on the LEDs, I stuffed paper towels into the windows ; )


...and masked off the back and sides.


I sprayed the table with a dark brown primer, looking quite glossy in this shot. 


This was followed by a spray of grey that I tried to keep mostly on the cobblestones.


Once the grey had dried, I went along and picked out various stones in lighter and darker shades of grey, along with various browns and bones. I then sprayed all the cobblestones with a gloss varnish and let it dry.


After the gloss varnish was dry, I painted a thinned wash of oil paints (black and brown mixed) over the cobblestones, making sure to get it into the cracks. Once that was dry, I wiped the oil paint off the tops of the cobblestones with a paper towel soaked in mineral spirits. It wasn't quite as successful as my previous attempt (on the Infamy Miniatures table), but I was able to salvage it.


I went through and highlighted most (75% or more) of the individual stones. I think it was worth it.


I then moved on the the other areas of the table, including drybrushing the timbers and shingles...


...adding some depth to the flooring in the tavern...


...and adding a bit of life to the facades.


At that point I started on the details, and testing the location of the cards on the table.


video

I also finished wiring up the LEDs and lampposts (above and below).


video


I mentioned this in the last post, but I wasn't too keen on painting the keyline locations for the Street Cards, but after talking with Mark Gibbons I changed my mind as he described the table as the "ultimate Dark Deeds accessory" rather than a terrain piece. Put that way, it was obvious that the lines would assist gameplay.


One of the final things to do was to paint up the Dark Deeds logo (custom cut by Alex at Ironheart Artisans). We settled on a pressed wax look.


All seemed finished until we talked about "filling" the space beside the tavern with little elements that told a story. Hopefully my impromptu butchery works well for you all.




Once again, thanks for looking. I appreciate it : )

Cheers
Dave

Wednesday, July 27, 2016

TERRAIN - Dark Deeds Demo Table - Part 1


I recently completed another fun terrain commission, this time for Games & Gears and with a bit of a twist. Rather than being a display or demo table for a miniatures game, it was a display/demo table for their card game Dark Deeds (created by some of my mates from the GW days). Rather than a "terrain table" per se, it was described as being "the ultimate Dark Deeds gaming accessory". My brief from Sam, the owner of Games & Gears, was "make it Epic!"

I spoke quite a bit with Mark Gibbons (artist extraordinaire) about the look and feel of the back streets of Anthrand. We decided on using the excellent buildings from Tabletop World, and - to reduce the encroachment onto the table - I went about cutting the buildings in half with a hacksaw.


The initial layout for the table. The mat from the game determined the rest of the dimensions.


We also decided we wanted flickering candle light in the windows, so I placed 
an order with Ron at Fallout Hobbies and received the perfect set of LEDs.


Rarely does a terrain project go by now without working with Alex at Ironheart Artisans. 
He does great custom work that is certainly worth the price. For this project he created the cobblestone streets, the front, back and side panels to enclose and tidy up the project 
(more on these later), and the great crate that you can see at the top of the page.




Once I had the street section in place, I was able to shuffle 
around the half-buildings and try different arrangements.



We needed a tavern area (where all the nefarious missions are dealt out), 
so I started building it with foam bricks and balsa wood framing.


The city of Anthrand is a dark and gritty city, full of depth and texture, which was 
added to the table with quite a bit of greenstuff to raise some of the cobblestones. 


We wanted the buildings to loom a little more, so I added extensions 
to the roof lines with scribed plasticard and greenstuff shingles.


Initially the tavern floor was going to be stone, so I had added 
some raised stones to create the outlines of the card positions.


These two buildings were joined together by filling in the space 
between them with foam blocks and coating them in PVA glue.


A look at the long curb stones sculpted from greenstuff.


The floor of the tavern was switched to a wooden floor and a large stone 
threshold was added. The floor boards are all scribed plasticard.


Each level of the buildings were pinned to the others, and then the buildings were screwed down to the base. After that, I used my Dremel to cut out the windows of the rooms that would be holding the "flickering candles". The next stage included priming the interior of those rooms so that there were no strange reflections etc. The rooms were then wired with the LEDs and sealed up with the MDF panels you can see in the photo above (sadly I forgot to take photos of most of this stage of the project).



The panels were all attached one at a time and given time to dry etc. As you can see in the 
photo above, some panels required a bit of encouragement in the form of clips sand clamps.


Here's a shot of the first stages of the wiring, making sure all of the wires 
could be connected (after they had been green stuffed in place, of course).


A shot of the side panel with the gap being covered with greenstuff shingles : )


At this stage the build is almost complete.


The second stage of the lighting involved a little bit of testing, 
with everything being held in place with painters' tape.


And finally (for the build at least) we decided to add some street lamps. 
These O-scale lamp posts were pre-wired and really just needed a new paint job : )


Anyway, that's the first part of this look at the Dark Deeds display table. Next time I'll go through the painting process. Hope you enjoyed it!

Cheers
Dave

Saturday, July 16, 2016

POST-APOC - Survivors, from Brigade Games (Part 3)

And here are the final ten models from the original 30 I painted for Brigade Games. Tons of fun painting them, and doing some research to get some of them to look like characters we might know and love ; )

You can find them HERE on the Brigade Games website.